Uluhlu lwe-torque yokuqinisa uphondo lwe-ultrasonic
2026-01-06
| Uluhlu lwe-torque yokuqinisa uphondo lwe-ultrasonic | ||
| Iinkcukacha zeskrufu | Ukuqinisa i-torque yamandla ebanga le-12.9 | Ukuqinisa i-torque ngamandla okulinganisa 8.8 |
| I-M4 x 0.7 | 5 Nm | |
| I-M5 x 0.8 | 11 Nm | 6 Nm |
| M6 x 1 | 19 Nm | 11 Nm |
| I-M8 x 1.25 | 46 Nm | 25 Nm |
| M10 x 1.5 | 93 Nm | 50 Nm |
| M12 x 1.75 | 160 Nm | 90 Nm |
| I-torque yokuqinisa izikrufu zesiseko/sesixhobo | ||
| Iinkcukacha zeskrufu | Ukuqinisa i-torque yamandla ebanga le-12.9 | |
| M6 x 1 | 15.2 Nm | |
| I-M8 x 1.25 | 32 Nm | |
| M10 x 1.0 | 70 Nm | |
| M12 x 1.75 | 100 Nm | |
| Amanqaku ongezelelweyo malunga nomlinganiselo wamandla: Okukhona umgangatho wamandla wesikrufu uphezulu (umz., 12.9), kokukhona i-torque yokuqinisa enokumelana nayo iphezulu, kwaye i-torque ecetyiswayo iphezulu; Umahluko kwiinkcukacha: Nokuba ububanzi obuqhelekileyo besikrufu buyafana (umz., M6), i-torque ecetyiswayo iya kwahluka ngokuxhomekeke kwimeko yesicelo (jikelele/isiseko). Ipharamitha ehambelanayo kufuneka ikhethwe ngokweemfuno zokwenyani zokuhlanganisa. | ||